Programming The Dispenser - Bunn LCA-1 Installation & Operating Manual

Two basic modes are available to the operator: Display Mode and Program Mode. Open the dispenser door to
access the digital Programming Switches with LED display. To enter the Display Mode, Set the RUN/NIGHT/
PROGRAM Switch to the RUN position.
Display Mode: Used to view the current set-up values. Use the MENU switch to scroll to the next display.
NOTE: The display blanks out after two minutes of inactivity. Press any button to activate the display.
LED DISPLAY
1 8 0
MENU (-)
0 1 8 0
MENU (-)
1
MENU (-)
2
MENU (-)
3
MENU (-)
4 O
MENU (-)
XX.X
MENU (-)

PROGRAMMING THE DISPENSER

DISPLAY MODE
Home View
(+)
Tank Temperature
(+)
3 0
Dispense Ratio
(+)
0. 0
Portion Volume
(+)
0. 0
Dispense Total
(+)
F F
Rinse Alarm (Hrs)
(+)
Software Version
(+)
DESCRIPTION
LCR-1 Alternates between the Tank and
Cabinet Temp.
LCA-1 Displays Tank Temp only.
Displays Target Tank Temperature (F°)
Displays Dispense Ratio (XXX:1)
Displays Portion Dispense Volume
(XX.X Oz.).
Set to 0.0 to Disable.
Displays Total Coffee Concentrate
Dispensed (XX.X Gal)
Displays The Number Of Hours
Between Required Rinses.
(Default = OFF, Alarm Disabled)
Displays Software Version # -
Exits To Home View After 3 Seconds.
12
44806.1 081211