Bunn LCA-1 Installation & Operating Manual page 13

PROGRAMMING THE DISPENSER (Cont.)
Program Mode
: Used to change or enter new set-up values.
To enter the Program Mode, Set the RUN/NIGHT/PROGRAM Switch to the PROGRAM position, the unit will
display "__PPP" to indicate it is in the Program Mode. Use the MENU switch to scroll to the next display. Use
the Increase (+) and Decrease (-) switch to adjust the values.
LED DISPLAY
0 1 8 0
MENU (-)
1
MENU (-)
2
MENU (-)
3
MENU (-)
4
MENU (-)
XX.X
MENU (-)
PROGRAM MODE
Tank Temperature
(+)
3 0
Dispense Ratio
(+)
0. 0 Portion Volume
(+)
0. 0 Dispense Total
(+)
0. 0
Rinse Alarm Timer
(+)
Software Version
(+)
DESCRIPTION
Default = 180°F (82°C)
Range = 120° - 200°F (49 - 93°C)
Ready Temp = Tank Temp minus 10°F
Set Coffee Mix Ratio
Default = 30:1
Range = 20 Max / 100 Min
Set Portion Dispense Volume
Default = 0.0, Disabled
Range = 16.0 / 40.0 Oz.
Hold Decrease Switch to Reset Total
to Zero. 0.0 Gal (0.0 L)
Default = OFF (Rinse Alarm Disabled)
Range = 8 - 24 hrs
Displays Software Version # -
Exits To Home View After 3 Seconds.
13
(~5.5°C)
(0.5 / 1.2 L)
44806.1 081211