Bunn LCA-1 Installation & Operating Manual page 8

OPERATING CONTROLS AND INTERFACE (Continued)
Selector Switches: (Located behind the splash guard panel)
a
b
c
Left Sw:
a. Prime: Dispenses concentrates only – Primes the concentrate pump.
b. Normal: Normal dispense mode - Dispenses mixed product (concentrate and water).
c. Rinse: Dispenses hot water only- Flushes the dispense tip.
Right Sw:
a. Run: Normal operating position.
b. Night: Anti-pilfering mode that disables dispensing, but keeps heater and chiller operational.
c. Program: Enables programming and set up of the dispenser.
WARNING - The NIGHT Mode does not remove AC power from the dispenser. Disconnect power source before
servicing the dispenser.
Programming Switches: Used in conjunction with the LED display to program and calibrate the dispenser to
customer specific requirements.
a. Down Arrow: used to scroll to the next menu screen.
b. (+): used to increase the displayed value.
c. (EXIT): used to exit the programming menu.
d. (-): used to decrease the displayed value.
e. UP Arrow: used to scroll to back to previous menu screen.
e d c b a
8
a
b
c
44806.1 081211