Downdraught Extractor - AEG FM 2500DD-A Instruction Book

Downdraught Extractor

1. To turn the downdraught extractor
k
on, press .
2. To select the height position, press
m
.
The downdraught extractor will
move to middle position and switch
on at extraction rate 1.
To turn the downdraught extractor
l
off, hold down until bottom
position has been reached.
k
Pressing will turn extraction off,
but the downdraught extractor will
remain where it is and not descend
into the worktop.
Height positions
Installation beside electrical appli-
ances
The downdraught extractor is
variable between the middle and top
position.
Raising
The downdraught extractor is
switched on.
Select the height position within 10
seconds.
m
1. Press .
The downdraught extractor will
move to middle position. The
dampers are deployed.
m
2. Press again.
10