Description Of The Appliance; Extractor Version; Filter Version - AEG 8160 D Operating And Installation Instructions

Description of the Appliance

Extractor version

• The hood is supplied as an extractor unit
and can also be used with a filtering
function by fitting one charcoal filter
(special accessory).
• You will need original AEG charcoal filter
for this function (see Special
Accessories).
• The air is discharged to the outside
through a pipe, which must be fitted to
connection flange A. Fig. 1.
• In order to obtain the best performance
the hose should have a diameter equal to
the outlet hole.
Should there already be a pipe of diameter 125 mm that ducts to the
outside through the walls or roof, it is possible to use the 150/125
mm reduction flange provided. In this case the hood will be slightly
more noisy.

Filter Version

• The air is filtered through an charcoal filter and returned to the
kitchen through the top grill of the outlet pipe.
• You will need an original AEG KF8 charcoal filter for the filtering
function. (See Special Accessories).
• Fix the deflector using 2 screws Ø 2,9x13 mm. Fig. 2.
• Optionally, the position of the chimney elements can be changed.
When using the hood in the filter
version the chimney must be fixed at
the top, with the air outlet grill at the
side.
Fig. 1
Fig. 2
67