Description Of The Appliance; Extractor Version; Filter Version - AEG HD 8760 Operating And Installation Instructions

Description of the Appliance

• The hood is supplied as an extractor unit and can also be used with
a filtering function by fitting one charcoal filter.
• You will need an original AEG charcoal filter for this function
(Available from your local AEG Service Force Centre).

Extractor version

• In this version fumes are
extracted to the outside via
a hose connected to the
coupling ring. Fig. 1.
• In order to obtain the best
performance the hose
should have a diameter
equal to the outlet hole.
• Should there already be a
pipe of diameter 125 mm
that ducts to the outside
through the walls or roof, it
is possible to use the 150/
125 mm reduction flange
provided. In this case the
hood will be slightly noisier.

Filter Version

• The air is filtered through a
charcoal filter and returned to
the kitchen.
• You will need an original AEG
charcoal filter for the filtering
function. (See Special
Accessories).
• Fix the deflector using 2 screws
Ø 3.5x9.5 mm. Fig. 2.
reduction
flange
coupling ring
Fig. 1
Deflector
Fig. 2
5