Installing The Cooker Hood; Installation Requirements - Electrolux EFC 630 Instruction Manual

Please ensure that when the appliance is
installed it is easily accessible to an
engineer in the event of a breakdown.
All installations must comply with the
local authorities requirements for the
discharge of exhaust air.
Incorrect installation may affect the
safety of this cooker hood.

Installation Requirements

Before installation check the wall to
which the cooker hood is to be fitted for
electric cables, water pipes or gas.
This cooker hood is designed to be fixed to
any rigid vertical surface over a cooking area,
and can be used in the extraction (ducted to
the outside) or recirculation mode.
The installation work must be undertaken by a
qualified and competent person. The
manufacturer disclaims any responsability for
damage due to incorrect installation of the
cooker hood or if the hood is not installed in
compliance with relevant regulations
controlling this type of installation.
Unpacking
The EFC630 is supplied with the following
components for installation:
• Canopy (C), including controls, worktop
illumination and fan unit.
• U-shaped upper chimney section (S)
• U-shaped lower chimney section (I)
• Recirculation grilles (G)
• Reduction flange 150-120mm dia (K)
• Recirculation spigot (R)
• Wall fixing brackets for (1)
• Wall fixing brackets for (2)
• Rawl plugs
• Fixing screws
• 120-125mm ducting collar

INSTALLING THE COOKER HOOD

11