Table of Contents
Advertisement
HALOGEN BULBS
This range hood requires
WARNING
Always switch off the electrical supply before performing any operations on the appliance.
To change bulbs:
1 Loosen the ring nut by turning it counterclockwise.
2 Remove the bulb by pulling downward (DO NOT ROTATE).
CAUTION
Bulb may be hot.
3 Replace with a bulb of the same type (MR16, 12V, 20W). Do not touch replacement
bulb with bare hands.
CAUTION
Use of bulbs greater than 20 watts will cause the fuse to open..
four (4)
halogen bulbs (Type MR16, 12V, 20W).
Operation
9
BULB
RING NUT
Figure 2
Advertisement
Table of Contents
Troubleshooting
