Table of Contents
Advertisement
HALOGEN BULBS
This range hood requires two halogen bulbs (Type MR16, 12Volt, 20 Watt Max).
WARNING
Always switch off the electrical supply before performing any operation on the appliance.
1 Loosen the ring nut by turning it counterclockwise.
2 Remove the bulb by pulling downward (DO NOT ROTATE).
CAUTION
Bulb may be hot.
3 Replace with Type MR16, 12Volt, 20 Watt Max halogen bulb.
4 Reinstall the ring nut. Turn clockwise to secure.
CAUTION
Use of bulbs greater than 20 watts will cause the fuse to open..
Operation
9
BULB
RING NUT
Figure 2
Advertisement
Table of Contents
Troubleshooting
