Microsoft Windows 95 2; Microsoft Windows 3.1 Or Microsoft Windows For Workgroups 3.1 2 - Canon BJC-620 User Manual

3UREOHP &DXVH
The Microsoft The Microsoft
Windows Windows Printing
Printing System for the
System does not BJC-620 may not
work correctly be set as the
default printer,
The Microsoft
Windows Printing
System may not be
properly installed,
Output looks The print quality
too light selection does not
match your
document.
Output appears The resolution
jagged selected via the
Microsoft
Windows Printing
System may be 180
x 180 dpi.
5-8 Troubleshooting
6ROXWLRQ
Set the Canon BJC-620 as the default printer as
follows.
When using Microsoft Windows 95:
1. Open the Printers folder and select the BJC-620.
2. On the File menu, click Set As Default.
When using Microsoft Windows 3.1 or Microsoft
Windows for Workgroups 3.1:
1. Double-click on the Printer Setup icon in the
Microsoft Windows Printing System group.
2. Select the BJC-620.
3. Click on Set As Default Printer.
Print the Microsoft Windows Printing System test page
to make sure that the Microsoft Windows Printing
System is installed correctly and the printer works
correctly. To print the test page, press the Print Test
Page button in the Status Window.
Note: If the same port has been selected for the BJC-
620 and another Microsoft Windows Printing System
printer, connect the other Microsoft Windows Printing
System printer to a different port (such as File). Then,
restart Microsoft Windows.
If you select the High Speed (Text & Graphics) print
quality, output tends to be light. Try High Quality Text
or High Quality Graphics.
Changing the resolution to 360 x 360 dpi or higher
should correct this problem.
Chapter 5