Digital To Digital (Dd) - RME Audio ADI-8 QS User Manual

9.15 Digital to Digital (dd)

Default: Direct
Available settings: Direct, Effects
The function Digital to Digital can operate in two ways. In mode Direct the digital input signal is
sent with bit-accuracy to the digital outputs. In mode Effects the digital input signal is first proc-
essed by the digital settings Output Trim and Global Level, then by the Input Trim settings, then
– when activated – by the digital limiter, before finally reaching the digital outputs. The block
diagrams show the signal flow for both modes.
Digital to Digital - Direct
Digital to Digital - Effects
User's Guide ADI-8 QS © RME
22