Track Xrbag Adaptor - Renault Clio Workshop Repair Manual

50 TRACK XRBAG ADAPTOR(B50)
for vehicles with side air bags
This bornier is connected in place of the compu-
ter.
Using the , it allows all the trigger lines to
XRBAG
be checked, the computer supply voltage to be
measured and forces the air bag warning light on
the instrument panel to illuminate.
Terminals also allow continuity checks on the dia-
gnostic lines, the earth, the warning light lines
and on the supply to the computer (see "Fault
Finding" section).
the DPP terminal is not currently used on
NOTE :
this system.
Identification of adaptor output wiring
1 : Not currently used
2 : Supply and warning light
A : Driver's pretensioner lines
B : Passenger's pretensioner lines
C : Driver's air bag lines
D : Passenger's air bag lines
E : Driver's side air bag lines
F : Passenger's side air bag lines
Air bags and seat belt pretensioners
14328-1S
WIRING
DUMMY IGNITION MODULE
A dummy ignition module integrated in a small
red box is supplied in the XRBAG.
15749S
It has the same electrical specifications as a real
ignition module and is used to replace the air bag
or the pretensioner during fault finding.
Refer to your After Sales Head Office for further
information.
88-7
88