SIDE
FAULT FINDING - INTERPRETATION OF FAULTS
DF041
present
NOTES
Lock the computer using the command on the fault finding tool.
Check that the passenger side sensor is connected correctly and check its connections.
Check the condition of the connections on the computer (tracks 22 and 23).
Check the condition of the 50 track connector (locking system, connections,...).
Replace the wiring if the fault persists.
AFTER REPAIR
Air bags and seat belt pretensioners
Disrupted passenger's side sensor signal(or in open circuit)
None.
Reconnect the computer and the passenger side sensor then switch on the ignition
again.Erase the computer memory then switch off the ignition. Carry out a check using the
fault finding tool and, in the absence of a fault, unlock the computer.
WIRING
88-75
88
1AB8651.0