Renault Clio Workshop Repair Manual page 55

SIDE
FAULT FINDING - INTERPRETATION OF FAULTS
DF002
present
NOTES
1.dEF
For a micro-cut fault, check the computer supply lines :
- condition of the connections on the computer,
- the condition of the computer earths (tracks 6 and 30 on the 50 track connector to the front right pillar
earth).
- condition/ position of the fuse,
- condition and tightness of the battery terminals.
2.dEF - 3.dEF
Carry out the operations necessary to obtain the correct supply voltage for the computer :
9 volts 0.1 < correct voltage < 18 volts
- Check the battery charge.
- Check the charging circuit.
- Check the tightness and condition of the battery terminals.
- Check the computer earth.
AFTER REPAIR
Air bags and seat belt pretensioners
Computer supply voltage
1.dEF : Too many micro-cuts
2.dEF : Feed voltage too low
3.dEF : Feed voltage too high
Use the B50 XRBAG adaptor for operations on the computer connector.
None
NOTES
None
NOTES
0.1.
Erase the computer memory.
WIRING
88-53
88
1AB8651.0