Renault Clio Workshop Repair Manual page 30

WIRING
88
Air bags and seat belt pretensioners
Cover the assembly with a stack of four old tyres.
96835S
Unroll all the wire supplied with the tool so that
you are far enough away from the assembly
(approximately 10 metres) when the unit is
triggered and connect it to the air bag cushion
wiring.
Connect the two feed wires on the tool to a
battery.
After ensuring that no-one is near the unit, carry
out the destruction of the air bag by pressing the
two push buttons on the tool at the same time.
if the unit cannot be triggered (faulty
NOTE :
ignition module), return the old part in the
packaging from the new replacement part to ITG
(Service 0429).
• Passenger air bag module
Destruction of the component removed from the
vehicle
Carry out the procedure in the same way as for
the driver's air bag in the pile of old tyres (see
above).
88-28