Renault Clio Workshop Repair Manual page 69

SIDE
FAULT FINDING - INTERPRETATION OF FAULTS
DF033
present
NOTES
The absence of this fault corresponds to the absence of programming for the side sensors identification
by the air bag computer (this identification enables the computer to check that the side sensors are the
correct ones for the vehicle).
This bargraph is normally illuminated when the computer is new (it is sold without identification).
Carry out the identification programming for the side sensors using the "Side sensor programming"
command on the fault finding tool.
AFTER REPAIR
Air bags and seat belt pretensioners
Side sensor programming not carried out
None.
Erase the computer memory then switch off the ignition
Carry out a check again using the fault finding tool
WIRING
88-67
88
1AB8651.0