Safety Information - Philips HDT8520 Manual

1.1

Safety information

Your HD recorder is powered using a 12 V power supply unit. Your HD recorder has been
manufactured to meet the appropriate safety standards, but you must follow the below instructions
to operate it safely. Keep these instructions for future reference.
Danger
• Your HD recorder does not contain any user-serviceable parts. Do not attempt to open it. All
maintenance work must be carried out by qualified service centres.
• The supplied mains plug is a non-rewireable type. If you need to replace the fuse, you must use an
ASTA- or BSI-approved BS 1362 fuse, rated at 3 A and marked as shown below.
The plug has its fuse beneath a fuse cover on its face. Use a screwdriver to lever off the fuse
cover, replace the fuse with a new one and refit its cover. Never use a plug if its fuse cover is
missing.
The fuse is inside the rewireable plug. Use a screwdriver to remove the plug's back cover. Never
put the plug into the mains socket when its cover is removed. Lever out the fuse and replace it with a
new one. Replace the plug's back cover.
If the supplied mains plug is not suitable for your mains socket-outlet, DO NOT plug
it in. Remove its fuse and then cut the plug off the lead. Destroy the severed plug
immediately to avoid the shock hazard which would exist if this were to be plugged
into a mains socket. Fit an appropriate mains plug on the lead. If this plug contains
a fuse, it should be as described above. If you are using a non-fused plug, an external
fuse must not exceed 5 A.
Important
or
AM
FUSE of correct value
E
N
L
5