Frequently Asked Questions - Philips HDT8520 Manual

Accessories
• Remote control
Protocol: RC6
• Batteries: 2 x 1.5V type AAA/R03
• User manual
• QSG
• Freeview flyer
• Retune flyer
• Coaxial RF cable
• HDMI cable
• AC/DC converter incl. mains cord
Miscellaneous
• Temperature range (°C)
Operating +5 °C to +45 °C
Storage -25 °C to +70 °C
• Mains: AC 230 V +/- 10%, 50 Hz
• Power consumption: < 15 W
Standby: < 0.4 W
• Weight:
Product: 1.75 Kg
Including packaging: 2.7 Kg
• Dimensions:
Product (mm) 240 x 210 x 65
Packaging (mm) 360 x 290 x 100
Due to continued improvements, this
information is subject to change without notice.
Frequently asked questions
10

Frequently asked questions

Connection
Your HD recorder does not display any
digital TV channels on your TV. You may
also see the on-screen message "Signal
lost".
• Check that the aerial cable from the aerial
wall socket is correctly connected to your
HD recorder (see page 11).
• There may be a temporary problem with
the reception, caused, for example, by bad
weather; try again later.
• Check if there is any network message
related to this signal loss. You can access the
Network messages menu from Menu >
Settings > Network messages.
The time-shift bar with "Live" indication
appears when you try to change a
programme.
Repeat the programme change request to watch
the programme.
Setup
Your HD recorder does not seem to be
working and there are no lights on the
front panel.
Check that the 12 V power supply unit is
correctly connected to your HD recorder.
Your HD recorder does not seem to be
working and a channel number is shown
on the front-panel display.
• Check that all connections are properly
made (see page 11).
• Check that your TV is plugged into the mains
and that it is switched on.
• Check that you have selected the correct
A/V channel/source on your TV depending
on how your HD recorder is connected to
it (that is, using HDMI or SCART). Refer to
your TV's user manual for instructions.
37