Removal Of The Regulator; Removal Of The Choke Resistor; Removal Of The Horn; Removal Of The Blinker Unit - PEUGEOT V-Clic Workshop Manual

MISCELLANEOUS OPERATIONS

Removal of the regulator.

Removal of the choke resistor.

Removal of the horn.

Removal of the blinker unit.

Removal of the ignition switch.

- Removal of the front top cover panel (see
procedure 7).

Removal of the high tension coil.

- Removal of the storage compartment (see
procedure 1).
- Removal of the central cover panel (see
procedure 3).
- Remove the lower RH side fairing (see
procedure 4).
- Disconnect the high voltage coil (1).
- Disconnect the suppressor.
- Remove the fastening screw (2).
- Remove the high tension coil.

Removal of the kickstand contact switch.

- Remove the lower LH side fairing (see
procedure 4).
- Disconnect the kickstand contact switch.
- Remove the 2 fixing bolts (1).
- Remove the lickstand cinstact switch.
28
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
2
1
1