- Disconnect the battery.
Remove:
- The battery (2).
- The CDI unit (3).
- Remove the 4 fixing bolts (4).
- Separate the front of the footboard which is
linked to the rear part of the leg shield
panel (5).
- Remove the footboard (6).
Removal of the taillignt.
Removal of the splash guard.
- Removal of the storage compartment (see
procedure 1).
- Removal of the grab handle (see
procedure 2).
- Removal of the central cover panel (see
procedure 3).
- Removal of the lower side fairings (see
procedure 4).
- Removal of the side fairings (see
procedure 5).
- Disconnect the taillight.
- Remove the 2 nuts (1).
- Remove the 2 bolts (2).
- Remove the taillight.
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
3
4
5
2
1
BODY PANELS
2
6
17