Removal Of A Turnsignal Light - PEUGEOT V-Clic Workshop Manual

BODY PANELS

Removal of a turnsignal light.

- Removal of the lower side fairings (see
procedure 4).
- Removal of the front top cover panel (see
procedure 7).
- Remove the 3 fixing screws (1) located on
each side of the vehicle.
- Remove the fixing screw (2) located on each
side of the vehicle.
- Open the front shield panel.
- Remove the 3 screws that secure the front
turnsignal light.
- Remove the front turnsignal light.
22
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
2
1