Vc Domain Group Configuration Replicated To Other Vc Domains During Vc Domain Maintenance - HP BL680c - ProLiant - G5 User Manual

VC Domain Group configuration replicated to other VC Domains during VC Domain Maintenance

IMPORTANT:
Maintenance are automatically replicated to all other VC Domains that belong to the same VC Domain
Group when the VC Domain that maintenance operation is confirmed or discarded.
The following information is replicated to all VC Domains in the VC Domain Group during VC Domain
Maintenance:
Domain settings
Configuration for double density servers (for example, BL2x220c)
Configuration for full-height and half-height single density servers (for example, BL460c, BL480c)
Ethernet settings
MAC Cache Failover:
IGMP (Internet Group Management Protocol) Snooping:
Server VLAN Tagging Support:
Multiple Network Speed Settings:
Network SNMP settings:
Fibre Channel SAN fabric settings:
Enable SMI-S
Fibre Channel SNMP settings:
For each Fibre Channel fabric:
Fabric name
For each network uplink:
Name
State
38 Managing VC Domains
The VC Domain, network, and storage configuration changes performed during VC Domain
Enable Fast MAC Cache Failover
MAC Refresh Interval
Enable IGMP Snooping
IGMP Idle Timeout Interval
Tunnel VLAN Taggings or Map VLAN Taggings
Force server connection setting
Preferred Link Connection
Preferred Link Connection Speed
Maximum Link Connection
Maximum Link Connection Speed
Enable SNMP
Read Community
System Contact
Each SNMP trap defined community and IP address
Enable SNMP
Read Community
System Contact
Each SNMP trap Community and IP address