Backing Up And Restoring Domain Configurations Through Vc Domain Maintenance - HP BL680c - ProLiant - G5 User Manual

IMPORTANT:
restore Virtual Connect configurations are allowed. Restoring Virtual Connect configurations require additional
care. If an old configuration is restored, verify that the configuration of this specific VC Domain remain
compatible with VC Domain Group, otherwise the VC Domain will be incompatible with VCEM. (For example,
actual server profiles in the VC Domain after the restore may not match the previous state registered by
VCEM.)
While VC Domain Maintenance enables the following actions to be performed on this VC Domain, the
actions might cause side effects in VCEM. Therefore, HP does not recommend performing these actions.
Domain-level operations (not recommended through VC Domain Maintenance):
Configuration restoration for backup configurations performed out of VCEM control
Domain deletion
To perform these domain-level operations, remove the VC Domain from VCEM, make the needed changes,
and then reimport the VC Domain to VC Domain Group.

Backing up and restoring domain configurations through VC Domain Maintenance

1. Go to the VC Domains tab.
2. Select the VC Domain upon which you want to back up the configuration.
3. Click VC Domain Maintenance. The VC Domain Maintenance page appears.
4. To unlock Virtual Connect Manager for domain, network, and storage changes, click Make changes
via VC Manager. The Virtual Connect Manager web interface appears in a separate browser window.
The Under Maintenance status indicates that the VC Domain is temporarily unlocked for domain, network,
and storage changes.
5. Using Virtual Connect Manager:
a. Log in with full user rights at Virtual Connect Manager.
b. Perform the domain backup by selecting Domain Settings Domain Configuration, selecting
the Backup/Restore tab.
c. Click Backup configuration. Wait until backup process completes.
6. Close the Virtual Connect Manager web browser and return to the VC Domain Maintenance page.
7. Click Complete VC Domain Maintenance. The Virtual Connect Enterprise Manager is
executing the request message appears with a job ID code.
8. Click OK to go to the Jobs page and monitor job progress.
To perform VC Domain configuration restoration through VC Domain Maintenance:
1. Select the VC Domains tab.
2. Select the VC Domain upon which you want to restore the configuration.
3. Click VC Domain Maintenance. The VC Domain Maintenance page appears.
4. Click Make changes via VC Manager to unlock Virtual Connect Manager for domain, network, and
storage changes. Virtual Connect Manager web interface appears in a separate browser window. The
Under Maintenance status indicates that the VC Domain is temporarily unlocked for domain, network,
and storage changes.
5. Using Virtual Connect Manager:
a. Log in with full user rights at Virtual Connect Manager.
b. Perform the domain backup by selecting Domain Settings Domain Configuration, selecting
the Backup/Restore tab.
c. Enter the file name for domain configuration.
d. Click Restore configuration. Wait until backup process completes.
6. Close the Virtual Connect Manager web browser and return to the VC Domain Maintenance page.
7. Click Complete VC Domain Maintenance. The Virtual Connect Enterprise Manager is
executing the request message appears with a job ID code.
8. Click OK to go to the Jobs page and monitor job progress.
40 Managing VC Domains
When a VC Domain is put in VC Domain Maintenance, operations such as backup and