Removing A Vc Domain From A Vc Domain Group - HP BL680c - ProLiant - G5 User Manual

If HP Virtual Connect 8Gb 24-port FC modules and HP Virtual Connect 4Gb FC modules share the
same IO bay slice. (For example, a HP Virtual Connect 4Gb FC module in IO Bay 3 and a HP Virtual
Connect 8Gb 24-port FC module in IO Bay 4).
In a multienclosure VC Domain, if there are mixed HP Virtual Connect 4Gb FC modules and HP Virtual
Connect 8Gb 24-port FC modules in the same IO bay from different enclosures. (For example, 4Gb
FC modules in the local enclosure, but 8Gb FC modules in the remote enclosures.)
To add a VC Domain to a VC Domain Group:
1. From the VC Domains page, select one or more VC Domains you want to add to the VC Domain Group.
2. Click Add to VC Domain Group.
(Optional) If the enclosures related to the selected VC Domains are not licensed to VCEM, then the
License page appears below the VC Domains list. For more information, see
VCEM. Otherwise, the Add VC Domain to VCD Group appears below the VC Domains list.
3. (Optional) You can provide a new name for the unconfigured VC Domains. Valid VC Domain Group
names are alphanumeric, hyphens (-), underscore (_), and cannot exceed 64 characters.
4. Enter the username and password for each unconfigured VC Domain. Ensure you provide VC Domain
credentials with full privileges. VC Domains appear as:
Unconfigured domains, which appear in the System Name column with the unassigned name,
VCD_name
Configured domains, which appear in the System Name column with their previously assigned
name
5. Enter the username and password for the Onboard Administrator of each unconfigured VC Domain.
Ensure you provide the Onboard Administrator credentials with full privileges if the Virtual Connect
Module is not configured.
6. (Optional) In some cases you might want to overwrite the existing VC Domain configuration for selected
VC Domains. To enable this action, select Existing VC Domain configuration settings for selected
VC Domain(s) without server profiles will be overwritten by selected base VC Domain
configuration defined for the VC Domain Group. In this case, VCEM validates that the selected VC
Domain configurations match the VC Domain Group configuration. VC Domains that are already
configured and have server profiles are not affected.
7. Select the VC Domain Group name to which you want to add the selected VC Domains.
8. Click OK. The Virtual Connect Enterprise Manager is executing the request message
appears.
9. Click OK to go to the Jobs page and monitor job progress.

Removing a VC Domain from a VC Domain Group

IMPORTANT:
will be located at this VC Domain.
VCEM detects the presence of logical server managers or upper level managers. When performing selected
tasks, a prompt dialog message appears and explains the impact of performing that task from outside the
logical server manager or upper level manager. The following message appears:
IMPORTANT: VCEM has detected you may be using other products, such as HP Insight
Dynamics
and any Server Profiles in this VC Domain unmanageable by this upper level
manager. Type YES to proceed with this operation.
To proceed, you must type YES, and then click OK. VCEM does not proceed if you cut and paste YES into
the field.
MAC, WWN, and serial number ranges enable Virtual Connect Manager to manage the allocation of new
addresses when you are releasing the VC Domain control back to Virtual Connect Manager, such as when
If you remove the last VC Domain from a VC Domain Group, the unassigned server profiles
VSE. Removing this VC Domain from its VC Domain Group will make it
Licensing an enclosure for
VC Domains 33