Available Sewing Area - Brother HE-800A User Manual

5. OPERATION
No. Setting items
67 Sewing end tension apply timing
68 Rear tack width (rectangle only)
OFF: Condense stitch
69 Program copy

- - . Available sewing area

Work clamp size
No.3
(A X B)
5.4 X 19.0 OFF
5.4 X 24.5
5.4 X 36.0
6.8 X 24.5 OFF
6.8 X 36.0 ON
6.8 X 47.0
7.3 X 24.5 ON
7.3 X 36.0 ON
7.3 X 47.0
ON, ON, ON or OFF, ON, OFF or OFF, OFF, OFF
45
-5 - 0 stitches
OFF: Condense stitch
0.1 - 1.5mm
0.1 - 1.5mm
(Normally set to 1.0)
OFF,
1 – 90 (Specify copy source)
3921Q
No.4 No.5 No.7 No.8
OFF ON N/A N/A
OFF ON
OFF OFF
ON ON N/A N/A
OFF OFF N/A N/A
ON OFF
OFF ON N/A N/A
ON OFF N/A N/A
ON ON
HE-800A
Setting range
The available sewing area (C x D) is determined by a
combination of the work clamp size (A x B) and the
needle plate hole size. Set panel DIP switch B correctly
in accordance with the work clamp and needle plate
being used. (Refer to "13-1. Panel DIP switches".)
If DIP switch B is not set correctly, it will not be possible
to set the normal values for the parameter. In addition,
the needle and cutter may touch the work clamp and
needle breakages or damage to the cutter may result.
DIP switch B setting
No.6 ON
Needle plate hole size
5.4mm
Available sewing area (C x D)
4.0 X 15.0
4.0 X 20.0
4.0 X 32.0
4.0 X 20.0
4.0 X 32.0
4.0 X 40.0
4.0 X 20.0
4.0 X 32.0
4.0 X 40.0
Unit Default
1 0
0.1 OFF
1 OFF
No.6 OFF
Needle plate hole size
7.3mm
4.0 X 15.0
4.0 X 20.0
4.0 X 32.0
5.4 X 20.0
5.4 X 32.0
5.4 x 40.0
6.0 X 20.0
6.0 X 32.0
6.0 X 40.0