Memory Switch Table - Brother HE-800A User Manual

11. CHANGING FUNCTIONS USING THE MEMORY SWITCHES

- . Memory switch table

The memory switch settings are effective for all programs.
No. Setting items
00. Cutter power
02. Work clamp lifting speed
03. Work clamp lowering speed
04. Work clamp height when treadle is
depressed backward
05. Work clamp height at neutral
position
06. Soft press height
07. Threshold value correction when
(*1)
work clamp is lifted
08. Threshold value correction when
(*1)
work clamp is lowered
09. Threshold value correction at start
(*1)
10. Extension time
sewing
11. Home position return cycle
12. Feed timing
13. Cutter dimension display during
automatic mode
14. Program number changing enabled
when program lock is set
15. Preventing the zigzag speed from
being changed
16. Upper thread tension when sewing
underlays
17. Checking the needle up stop
(*2)
position after sewing
(*1)... Memory switch No. 07. 08. 09.
Neutral position
Work clamp lowered ON position
No. 08.
Machine start ON position
No. 09.
2188Q
(*2)... When memory switch No. 17 is set to ON, error code E-62 may be displayed. If this happens, check the entry for
error code E-62 in "14. Error code table".
79
-1: Light
0: Light - Normal
1:
Normal
2:
Normal - Medium
3:
Medium
4:
Heavy
-4 - 4
-4 - 4
1 - 13mm
1 - 13mm
OFF, 0.1 - 8.0mm
-10 - 10
-10 - 10
-10 – 10
for continuous OFF, 100 – 1,000ms
OFF, 1 – 10
-10 – 10 ( x 0.24q)
ON: Cutter dimensions are displayed.
OFF: Production counter or bobbin
thread counter is displayed.
ON: Program
changed and the programmer
can be started.
OFF: Program numbers cannot be
changed and the programmer
cannot be started.
ON: Changes are prevented
OFF: Changes are allowed
ON: Strong (zigzag tension discs close)
OFF: Weak (zigzag tension discs open)
ON: No
OFF: Yes
HE-800A
Setting range
numbers can be
Unit Default
1 1
1 0
1 0
1 13
1 10
0.1 OFF
1 0
1 0
1 0
100 OFF
1 1
1 0
- OFF
- OFF
- OFF
- OFF
- OFF
Work clamp raised
ON position
No. 07.