Turning The Printer On/Off; Turning The Printer On - Canon satera LBP-5400 User Manual

Turning the Printer ON/OFF

The power switch to turn the printer ON or OFF is located on the right side of the
printer. Be sure to observe the following instructions in order to prevent unexpected
problems.

Turning the Printer ON

To use this printer, press " " of the power switch to turn the printer ON. After running
a self-diagnostic test on the printer unit and optional accessories, the printer will be
ready to print.
IMPORTANT
Do not turn the power ON immediately after turning it OFF. If you want to turn the printer
•
ON again after turning it OFF, wait at least 10 seconds after turning the printer OFF
before turning it ON again.
Be sure to set the paper cassette in the printer before you turn the power ON for the first
•
time after you install the printer.
NOTE
When you turn the power ON for the first time after you install a hard disk or when a
problem has occurred to the hard disk, the printer is ready to print after approximately 60
seconds after it is turned ON because the hard disk is formatted after the printer is turned
ON.
1
Press " " of the power switch on the printer.
2