Canon satera LBP-5400 User Manual page 27

2
Load the paper so that the edge of the paper is aligned with
the front side of the paper cassette.
Cassette 1
IMPORTANT
•
•
NOTE
•
26
CAUTION
Be sure to take the paper cassette out of the printer before loading paper.
If paper is loaded while the paper cassette is partially pulled out, the paper
cassette may drop or the printer may become damaged resulting in
personal injury.
CAUTION
When loading paper, take care not to cut your hands with the edges of the
paper.
If you use paper that has been poorly cut, multiple sheets of paper may be fed at
once. In this case, fan the paper thoroughly, and then align the edges of the stack
on a hard, flat surface.
When custom size paper is printed from LIPS LX Printer Driver, you can load the
paper either in portrait or landscape orientation. However, when you are printing
custom size paper of its long edges 215.9 mm or less with <
> set to <
are not printing from LIPS LX Printer Driver, load the paper in portrait orientation.
When loading letterhead paper or paper printed with a logo in portrait orientation
for printing, load the paper so that the printing side is facing up, as shown in the
following figure.
( : Feeding direction)
Cassette 2
>, load the paper in landscape orientation. When you