Table of Contents
Advertisement
<Warning message>
<Error skip>
<Warning message>
<Warning message>
<Error skip>
<Error skip>
50
Message
Cause and Remedy
Cause:
The amount of remaining toner is
low.
Remedy: Remove the toner cartridge and
gently rock it 5 or 6 times in the
vertical and horizontal directions.
Then re-install the cartridge in the
printer. If the message is still
displayed after this, or white streaks
appear on the printout, replace the
toner cartridge with a new one.
Cause:
The cartridge is out of toner.
Remedy: Replace the toner cartridge with a
new one.
Cause:
Paper in the cassette of the number
indicated on the display has run out.
Remedy: Load paper into the cassette of the
number indicated on the display.
Cause:
There is still paper inside the printer.
Remedy: Any paper still in the printer will be
output automatically.
Cause:
An error occurred when data was
being transferred between a PC and
the printer.
Remedy: Check the interface cable connection
and print the data again.
Cause:
The sizes of the paper loaded in the
paper cassette and paper tray are
different to the paper size settings for
the paper cassette and paper tray.
Remedy: When paper is being fed from the
paper cassette, make sure that the
size of the paper loaded in the paper
cassette is the same as the paper
size settings on the paper size
selector. Also when paper is being
fed from the paper tray, make sure
that the size of the paper loaded in
the paper tray is the same as the
paper size settings for the paper tray
before you press [
].
Advertisement
Table of Contents
