Canon Laser Shot LBP-1420 User Manual page 29

3
Fan the envelopes, holding them at both edges.
4
Set the paper guide width slightly larger than the envelope
width.
5
Insert the envelope stack into the printer as far as it will go, with
the print side facing down and the flap open.
Press the envelope stack so that it is below the limit guide. The multi-purpose tray
can hold about ten envelopes.
IMPORTANT
• There must be some space left between the stack of envelopes and limit guide. Do
• You cannot print on the back (adhesive surface) of the envelope.
• Load the envelope with the flap open and facing away from the printer as illustrated below.
28
Limit Guide
not use force to load the stack of envelopes as this may cause a paper feed failure.