Canon Laser Shot LBP-1420 User Manual page 19

6
Load the stack of paper so that it rests snugly against the rear
guide and side guides.
IMPORTANT
• Do not load label sheets with plain paper. If you want to load label sheets when plain
• Check which side of the label sheets is the face-up side and then load them face up
• Be sure to load label sheets in the landscape orientation.
• Make sure the paper stack is not above the limit mark. If the stack is higher than the
7
Adjust the paper size selector according to the size of the
paper loaded.
The factory-preset is A4.
IMPORTANT
• Make sure that the paper size indicated by the selector is the same as the paper
18
Limit Mark
paper is loaded, remove all the plain paper, then load the label sheets.
into the paper cassette.
limit mark, this may cause a paper feed failure.
Paper Size Selector
size loaded before inserting the paper cassette in the printer. Errors may occur if
the paper size is incorrect.