Canon Laser Shot LBP-1420 User Manual page 26

2
Fan the stack of postcards, then tap it on a flat surface to
properly align the edges.
Align the edges of the stack of postcards on a flat surface.
IMPORTANT
• If the postcards are warped, correct the warp so that it does not exceed 2 mm in an
upward direction. Then fan the stack of postcards to make sure that none of the
postcards are stuck together before loading the stack into the multi-purpose tray.
No more than
2 mm
3
Set the paper guide width slightly larger than the postcard
width.
4
Load the stack of postcards or stamped, self-addressed
postcards in the multi-purpose tray.
Press the stack so that it is below the limit guide. You can load up to about 40
postcards or stamped, self-addressed postcards in the multi-purpose tray.
When loading postcards, insert the stack as far as it will go into the printer, with the print
side of the postcards facing down and the top of the postcards going into the printer first.
Limit Guide
25