2
If the Printer is Using a Hard Disk (LBP-1710 only)
If the hard disk has been installed on the printer, turn off the power as described in
the following procedure.
IMPORTANT
•
If you attempt to shut down the printer when the paused job data or the secure job data
still remains in the hard disk, the message
shut down procedure has been selected, all the jobs are erased. However the job data in
the box is left in the hard disk. To resume printing, press [
•
Once the shut down procedure has been selected, you cannot cancel the operation. If
you need to turn the printer on again, first turn off the power by following the instructions
on the control panel and then turn the printer on again.
1
2
4
Press the power switch on the left side of the printer to the
"
" position.
The power is turned off.
Make sure that the
are off.
off
Press [
The printer gets ready for operation using the control panel.
indicator and HD indicator (green)
off
] to turn off the
appears. Once the
], to go online.
indicator.