One-Touch Raw+Jpeg  - Canon EOS 7D Instruction Manual

One-touch RAW+JPEGN
If the current recording quality is JPEG only, you can press the <P>
button to also capture a RAW image (1 by default) at the same
time. If the current recording quality is RAW only, press the button to
also capture a JPEG image (73 by default).
This button will not work if the camera is already set (p.60) to
capture RAW and JPEG images at the same time.
This setting can also be combined with white balance bracketing and AEB shooting.

You can also cancel the setting by pressing the <Q>, <M>, <A>,

or <x> button or operating the Live View shooting/Movie shooting
switch or power switch.
3 Setting the Image-recording Quality
1
Select [One-touch RAW+JPEG].
Under the [y] tab, select [One-

touch RAW+JPEG], then press
<0>.
2
Select RAW or JPEG.
Turn the <5> dial and select RAW or

JPEG, then press <0>.
3
Select the image-recording
quality.
Turn the <5> dial to select the image-

recording quality, then press <0>.
4
Take the picture.
Press the <P> button.


The image-recording quality will blink
on the LCD panel. To cancel the
setting, press the <P> button again.
Press the shutter button completely to

take the picture.

After the picture is taken, the setting
will be canceled.
63