Canon EOS 7D Instruction Manual page 156

k Shooting Movies
About the Information Display
Each time you press the <B> button, the information display will

change.
Frame rate
White balance
Picture Style
Auto Lighting
Optimizer
Image-recording quality
Movie-recording size
AE lock
Shutter speed
Exposure compensation amount
You can display the electronic level by pressing the <B> button

(p.244). When you start shooting a movie, the electronic level will turn
off. To display the electronic level again, stop the movie shooting and
press the <B> button. Note that if the AF mode is set to [u Live
mode] or the camera is connected to a TV set with an HDMI cable
(p.185), the electronic level cannot be displayed.
If there is no card in the camera, the movie shooting remaining time will

be displayed in red.
When movie shooting starts, the movie shooting remaining time will

change to the elapsed time.
When <

brightness is close to what the actual movie will look like.
156
Aperture
Drive mode
> is displayed in white, it indicates that the Live View image
Movie shooting remaining
time/Elapsed time
ISO speed
Shots remaining
AF mode
•d : Live mode
•c : Face detection Live
mode
•f : Quick mode
Recording movie
Magnifying frame
AF point
(Quick mode)
Exposure
simulation
Battery check