k Shooting Movies
Shooting Still Photos
Taking still photos during movie shooting
The still photo will record the entire screen including the semi-
transparent mask.
If you take a still photo during movie shooting, the movie will have a
still moment lasting about 1 sec.
The captured still photo will be recorded to the card, and the movie
shooting will resume automatically when the Live View image is
displayed.
The card will record the movie and still photo as separate files.
Functions particular to still shooting are shown below. Other
functions will be the same as for movie shooting.
Function
Image-recording quality
Exposure setting
AEB
Drive mode
Flash
For shooting still photos during movie shooting, using a UDMA (Ultra
DMA) card having a writing speed faster than 8 MB/sec. is
recommended.
If the shooting mode is <a>, the shutter speed, aperture, and ISO
speed set for movie shooting will be used as is.
158
You can take a still photo at anytime by
pressing the shutter button completely,
even during movie shooting.
As set in the [1 Quality] menu.
Shutter speed and aperture set automatically
(Manually if shooting mode is <a>).
Displayed when the shutter button is pressed
halfway.
Canceled
Modes other than self-timer available.
Flash off
Setting