Table of Contents
Advertisement
Changing the ISO Speed with One Touch
If the camera shake warning icon (
can raise the ISO speed simply by pressing the
record at a shutter speed that avoids the effects of camera shake.
1
Shift]
*Default setting.
2
Press the shutter button
halfway.
If
blink blue.
3
Press the
ter button down halfway. When the
ton lights up, press the shutter button all
the way.
With the shutter button pressed half-
way, pressing the
returns the ISO speed to the original
setting.
If you set the AE Lock
raising the ISO speed, the
ton will continue to light blue until you
release the AE Lock, even if you release the shutter button.
Auto ISO Shift does not work with
Shutter mode or with the flash.
Depending on the shooting conditions, the camera shake
warning icon (
speed is elevated.
70
(Rec.) Menu
[On]/[Off]*.
See Menus and Settings
appears, the
(Auto ISO Shift)
) displays while shooting, you
[Auto ISO
(p.
button will
button while holding the shut-
button again
(p. 53)
after
but-
) may not disappear even when the ISO
button to
23).
,
or
but-
, in Long
Advertisement
Table of Contents
