Transferring Raw+Jpeg Images - Canon EOS 7D Mark II Instruction Manual

d Transferring Images to a Computer
After the EOS Utility screen appears, do not operate EOS Utility. If any
screen other than EOS Utility's main window is displayed, [Direct transfer]
in step 5 on page 428 will not be displayed. (The image transfer function will
not be available.)
If the EOS Utility screen does not appear, refer to the Software
Instruction Manual (CD-ROM, p.539).
Before disconnecting the cable, turn off the camera. Hold the plug (not
the cord) to pull out the cable.

3 Transferring RAW+JPEG Images

426
3
Set the camera's power switch to
<1>.
When the computer displays a screen
to select the program, select [EOS
Utility].
The EOS Utility screen will appear on
the computer.
For RAW+JPEG images, you can specify
which image to transfer.
On the next page in step 2, select
[RAW+JPEG transfer], and select the
image to be transferred: [JPEG only],
[RAW only], or [RAW+JPEG].