Transferring Raw+Jpeg Images - Canon EOS 5D Mark III Instruction Manual

d Transferring Images to a Personal Computer
After the EOS Utility screen appears, do not operate EOS Utility. If any
screen other than EOS Utility's main window is displayed, [Direct transfer]
in step 5 on page 318 will not be displayed. (The image transfer function will
not be available.)
If the EOS Utility screen does not appear, refer to the EOS Utility
Instruction Manual (p.396).
Before disconnecting the cable, turn off the camera. Hold the plug (not
the cord) to pull out the cable.

3 Transferring RAW+JPEG Images

316
3
Set the camera's power switch to
<1>.
When the personal computer displays
a screen to select the program, select
[EOS Utility].
The EOS Utility screen will appear on
the personal computer.
For RAW+JPEG images, you can specify
which image to transfer. On the next
page in step 2, select [RAW+JPEG
transfer], and select the image to be
transferred: [JPEG only], [RAW only], or
[RAW+JPEG].