Replacing A Headlight Bulb - Yamaha FZS10Y Owner's Manual

Replacing a headlight bulb

This model is equipped with quartz bulb
headlights. If a headlight bulb burns
out, replace it as follows.
NOTICE
Take care not to damage the follow-
ing parts:
G Headlight bulb
Do not touch the glass part of
the headlight bulb to keep it free
from oil, otherwise the transpar-
ency of the glass, the luminosity
of the bulb, and the bulb life will
be adversely affected. Thor-
oughly clean off any dirt and fin-
gerprints on the headlight bulb
using a cloth moistened with al-
cohol or thinner.
G Headlight lens
Do not affix any type of tinted
film or stickers to the headlight
lens.
Do not use a headlight bulb of a
wattage higher than specified.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU23932
ECA10650
1. Do not touch the glass part of the bulb.
1. Disconnect the headlight coupler,
and then remove the bulb cover.
1. Headlight coupler
2. Headlight bulb cover
2. Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.
1. Headlight bulb holder
3. Place a new headlight bulb into po-
4. Install the headlight bulb cover,
5. Have a Yamaha dealer adjust the
7-32
sition, and then secure it with the
bulb holder.
and then connect the coupler.
headlight beam if necessary.
7