GRILL ASSEMBLY
5.
Place blue flame burner on the left and infrared on the right
into grill and insert burner tubes over orifice fittings on valve.
Secure each burner and burner shield with one (1) 1/4-20 x
3/4 phillips screw and nut. See Figures 27, 28, and 29. R3
model only: Use lugs to attach ground wire before screwing
the two infrared burners on. See Figure 28. Tuck ground wire
underneath the burners to prevent damage.
B101623-2-0112
R3B
R3
Figure 27
Figure 28
Page 39