Connecting To A Switchboard; Inserting A Pause; Recall - BT Granite User Manual

Digital cordless telephone answering machine

Hide thumbs Also See for Granite:

Table of Contents

General information

Connecting to a switchboard

This product is intended for use within the UK for connection to

the public telephone network and compatible switchboards, which

support tone and pulse dialling and timed break recall. If in doubt

please consult your service provider.

With some switchboards, after dialling the access code you may have

to wait for a moment while the switchboard picks up an outside line

so you will need to enter a pause in the dialing sequence.

Press and hold

to insert a pause (P) before entering the

telephone number.

You may also need to enter a pause when storing international

numbers or charge card numbers.

You may need to use the recall function if you are connected to

a switchboard/PBX (Private Branch Exchange), contact your PBX

supplier for further information. The recall function is set to timed

break recall and is also used for BT Calling Features.

If you experience any problems, please call the Helpline on 0808 100 6556*

Table of Contents