Table of Contents
Advertisement
Using additional handsets
50
The handset is automatically assigned the next
available handset number.
If registration is not successful first time, please
repeat the process again in case the base
registration period ran out of time.
If there are already 5 handsets registered to the
base, the registration will fail. The display shows
too MAny hAnDSetS.
You must de-register another handset before you
can register the new one.
Immediately, after de-registering, you can press
to jump to the Registration menu.
Menu
You can use up to five GAP compatible handsets with your BT Granite base
to extend your phone system without needing to install extension sockets for
each new phone. Your BT Granite handset can also be registered to up to four
other bases.
If you have purchased a BT Granite multiple pack any additional handsets come
pre-registered to the base.
If you have purchased an additional handset separately you must register it to
your BT Granite base before it can be used.
Handset registration
Registration
At the base:
1. Press and hold
You now have 1 minute to register the handset.
At the Granite handset:
1. Press Menu, scroll
2. Scroll
3. Enter the system PIN (default setting 0000) and press ok. The handset will
search for the base and then display Registering. When registration is complete
you hear a confirmation beep.
De-register a handset
1. Press Menu, scroll
2. Scroll
3. Enter the system PIN (default setting 0000) and press ok.
All handsets available for de-registration are listed.
4. Scroll
5. Display shows
If you experience any problems, please call the Helpline on 0808 100 6556*
for 10 seconds until you hear a long beep from the base.
or
to
ADvAnCeD Set
to regiStrAtion, press SeleCt.
or
to
ADvAnCeD Set
to De-regiSter, press SeleCt.
or
to the handset you want to de-register and press SeleCt.
Press
De-regiSter?
ok
and press SeleCt.
and press SeleCt.
to confirm or
to cancel.
BACk
Advertisement
Table of Contents
