Options | Advanced - NEC NP-PE401H User Manual

User Controls
Power-Saving mode

will disable the fol-
lowing connectors,
buttons or functions
when the projector is
in standby:
- AUDIO OUT con-
nector
- LAN and Mail
Alert functions
- Buttons other than
POWER button on
the cabinet
- Buttons other than
POWER ON but-
ton on the remote
control
- PC Control con-
nector
- Virtual Remote
Tool, PC Control
Utility Pro 4/PC
Control Utility
Pro 5
English ... 54
OPTIONS |
ADVANCED
STANDBY MODE
POWER-SAVING: Choose "POWER-SAVING" to save power

NORMAL: Choose "NORMAL" to return to normal standby.

DIRECT POWER ON
Choose "ON" to activate Direct Power mode. The projector will
automatically power on when AC power is supplied, without
pressing the
ON button on the remote control.
AUTO POWER OFF (MIN)
Sets the countdown timer interval. The countdown timer will start,
when there is no signal being sent to the projector. The projector
will automatically power off when the countdown has fi nished (in
minutes).
OFF TIMER (MIN)
Sets the countdown timer interval. The countdown timer will start,
with or without a signal being sent to the projector. The projector
will automatically power off when the countdown has fi nished (in
minutes).
CONTROL PANEL LOCK
When the keypad lock function is "ON", the control panel will
be locked however, the projector can be operated by the remote
control. By selecting "OFF", you will be able to reuse the control
panel. Press and hold the EXIT button on the projector cabinet for
about 10 seconds to turn off "CONTROL PANEL LOCK".
dissipation further < 0.5W.
buton on the projector control panel or the POWER