Prior To Initial Start-Up - AEG SANTO 4085-8 KG Operating Instructions Manual

Prior to Initial Start-Up

1
Before connecting the appliance to the mains and putting it into ope-
ration for the first time, leave the appliance to stand for 2 hours.
This is necessary to allow the oil to flow back into the compressor.
Otherwise the compressor may be damaged.
0
1. Please clean the appliance interior and all accessories prior to initial
start-up (see section: "Maintenance and Cleaning").
2. Remove the cold accumulation block from the freezer tray.
3. Place the cold accumulation block into a compartment or drawer only
after the optimal storage temperature of -18 °C has been reached, and
allow to freeze.
4. After 24 hours place the cold accumulation block in the freezer tray or
in the front of the upper drawer.
5. Re-freeze the thawed cold accumulation block in the same fashion, e.g.
after cleaning the appliance.
818 18 12-01/0
21