Changing Over The Freezer Compartment Door; Prior To Initial Start-Up - AEG SANTO Operating Instructions Manual

Changing over the freezer compartment door

Open the freezer compartment door
a little way.
Using a small screwdriver, press the
spring in the opening of the lower
door bearing slightly upwards and
take the door bearing out complete
with the door.
Position the covering cap (M) on the
opposite side.
Turn the freezer compartment door
through 180° and fit the lower door
bearing into the lower bearing cavity
of the freezer compartment door.
Lift the freezer compartment door a
little way upwards, fit it into the
upper door bearing, and at the same
time insert the lower door bearing
into the square hole. Small upwards
and downwards adjustments of the
freezer compartment door will make
fitting easier.
Prior to Initial Start–Up
Please clean the appliance interior and all accessories prior to initial
start-up (see section: "Cleaning and Care").
M
AEG43
55