Prior To Initial Start-Up; Plug Socket - AEG OKO-SANTO series Operating Instructions Manual

Unscrew the handle. Refit it on the oppo-
site side after having pierced the plugs
with a punch. Cover the holes left open
with the plugs contained in the docu-
mentation pack.
Prior to Initial Start–Up
Please clean the appliance interior and all accessories prior to initial
start-up (see section: "Cleaning and Care").

Plug socket

The plug socket necessary for connection of your appliance to the
electricity supply should be positioned so that it is possible to pull out
the appliance plug.
If your appliance is installed under a
continuous worktop, the plug socket
should be provided as shown.
A concealed protective contact plug
socket requires 10 A/16 A fusing.
If the socket is not accessible once the
appliance is built in, the electrical
installation must include suitable
means of isolating the appliance from
the mains (e.g. fuse, cut-out, current
trip or similar with a minimum
contact separation of 3 mm).
130
AEG44
300
49