Flat Network With Per-Vlan Spanning Tree; Basic Connectivity With Per-Vlan Spanning Tree; Redundant Connectivity With Per-Vlan Spanning Tree - HP Bc1500 - BladeSystem - Blade PC Supplementary Manual

NOTE: You can use this example to set IEEE 802.1w functionally by running the following command
once the file has been activated on the switch.
Enable
Configure
Spanning-tree mode rstp
End
Save running-config startup-config

Flat Network with Per-VLAN Spanning Tree

Use the default switch settings.

Basic Connectivity with Per-VLAN Spanning Tree

Use the default switch settings.

Redundant Connectivity with Per-VLAN Spanning Tree

Use the default switch settings.
38