MSTP (canned startup-config)
This sample will perform the following actions against a default configuration:
•
Disable PVST Interoperability mode
•
Remove VLAN 3-4093 from MSTI 15
•
Change all MSTI priorities to 32768
•
All other values remain in factory default
spanning-tree mode mstp
interface range ethernet e(1-41)
spanning-tree disable
exit
spanning-tree mst configuration
instance 1 add vlan 1
instance 2 add vlan 2
name cci
revision 1
exit
vlan database
vlan 1-2
exit
interface range ethernet
e(1,3,5,7,9,11,13,15,17,19,21,23,25,27,29,31,33,35,37,39,41-42,45-46)
switchport access vlan 1
exit
interface range ethernet
e(2,4,6,8,10,12,14,16,18,20,22,24,26,28,30,32,34,36,38,40,43-44)
switchport access vlan 2
exit
interface vlan 1
ip address dhcp
exit
interface vlan 2
ip address dhcp
exit
snmp-server community public ro view Default
NOTE: You will need to change the MST Name and Revision to match the rest of the network. Check with
your network administrator.
Flat network
Use the switch default settings.
36