HP Bc1500 - BladeSystem - Blade PC Supplementary Manual page 19

6. To verify that the SNMP traps are available and enabled in HP SIM:
• In HP SIM, select Options > Events > SNMP Trap Settings.
• Verify that the newly registered MIB file RADLAN-MIB.mib is in the Mib Name box.
NOTE: By default, the traps in this MIB may not be enabled for trap handling and severity because the
level is not configured. Review each trap and configure Enable Trap Handling and Severity based on
business requirements.
HP SIM 5.0.1 and earlier
For HP SIM to properly receive traps, you must manually install the HP PC Blade Switch-specific MIB and
one of its dependent MIBs. The following steps explain the MIB installation and registration process.
1. In HP SIM, select Options > Manage System Types.
Click New.
2.
3. For the System object identifier, click Retrieve from system.
Set the Community string (for example, public).
4.
5. Direct the target host name or IP address to the management address of the HP PC Blade Switch.
Click Get response. The Response value contains the results.
6.
7. Click OK. Notice that the System object identifier field is populated.
Select the System type: (for example, to Switch)
8.
9. Set the Product model to HP BladeSystem PC Blade Switch.
Click OK.
10.
To create a configuration file:
1. From the HP SIM server, open a DOS command prompt window.
2. Change the current working directory to the HP SIM MIBS folder, which by default is c:\Program
Files\HP\Systems Insight Manager\mibs.
3. Copy the following files to HP SIM MIBS folder:
RADLAN-MIB.mib
snmpv2-smi-v1.mib
snmpv2-tc-v1.mib
4. At the DOS prompt, execute the command: mcompile RADLAN-MIB.mib
5. Verify that the "MIB Compilation completed successfully" message displays.
19